Model Numbers

ElitePRO™ Series Thermostats and Accessories

S1100 and S1200

S1000

S900

 

Product

Part Number

Redlink 3.0

Video Doorbell

Onboard radar sensor

IAQ

Operating Ambient Temperature

Operating Relative Humidity

Shipping Temperature

Dimensions in inches (mm)

ElitePRO S900 White Thermostat with grey bottom accent

THX900W1

—

—

—

Control humidifier, dehumidifier or ventilator

31 to 102 °F (2.8° to 38.9° C)

5% to 90%

Non-condensing

-20 to 120 °F (28.9 to 48.9 °C)

Thermostat:

3-9/19" H x 5-1/4" W x 14/16" D

(90 mm H x 133 mm W x 24 mm D)

 

Display size: 4.3-inch capacitive touchscreen display. Resolution 800 by 400 pixels.

ElitePRO S900 Black Thermostat & bottom accent

THX900B2

—

—

—

ElitePRO S1000 White Thermostat with silver bottom accent

THX1000W1

✓

—

✓

Control humidifier, dehumidifier or ventilator (2 of 3)

ElitePRO S1000 Black Thermostat with dark silver bottom accent

THX1000B2

✓

—

✓

ElitePRO S1100 White Thermostat

THX1100W3

✓

—

✓

Air quality monitoring and reporting with VOC & estimated CO2 detection. Control humidifier, dehumidifier or ventilator (2 of 3)

Thermostat:
37 to 102 °F

(2.8° to 38.9° C)

5% to 90%

Non Condensing

-20 to 120 °F

28.9 to 48.9 °C)

Thermostat:
3-9/19" H x 5-1/4" W x 14/16" D

(90 mm H x 133 mm W x 24 mm D)

 

Display size: 5-inch capacitive touchscreen display. Resolution 800 by 400 pixels.

ElitePRO S1100 Black Thermostat

THX1100B4

✓

—

✓

ElitePRO S1200 White Thermostat

THX1200W5

✓

✓

✓

Thermostat:
37 to 102 °F

(2.8° to 38.9° C)

5% to 90%

Non Condensing

-20 to 120 °F

28.9 to 48.9 °C)

ElitePRO S1200 Black Thermostat

THX1200B6

✓

✓

✓

ElitePRO S1200 White Thermostat with wireless indoor sensor

YTHX1200W5

✓

✓

✓

ElitePRO S1200 Black Thermostat with wireless indoor sensor

YTHX1200B6

✓

✓

✓

ElitePRO S1200 White Thermostat - EIM Required

THX1200W7S

These thermostats are included in the YTHX1200W7 and YTHX1200B8 kits with EIMs. These ElitePRO models cannot be used without pairing the thermostat with an EIM. These models include a U relay on the thermostat, which can be assigned to certain equipment that is not located in the same space as the EIM. If replacing an ElitePRO thermostat that was previously used with an EIM, any of the S1000, S1100, or S1200 thermostats can used as a replacement.

ElitePRO S1200 Black Thermostat - EIM Required

THX1200B8S

ElitePRO S1200 White Thermostat with EIM

YTHX1200W7

✓

✓

✓

Air quality monitoring and reporting with VOC & estimated CO2 detection. Control humidifier, dehumidifier or ventilator (all 3)

Thermostat:
37 to 102 °F

(2.8° to 38.9° C)

5% to 90%

Non Condensing

-20 to 120 °F

28.9 to 48.9 °C)

Thermostat:

3-9/19" H x 5-1/4" W x 14/16" D (90 mm H x 133 mm W x 24 mm D)

 

Display size:

5-inch capacitive touchscreen display. Resolution 800 by 400 pixels.

ElitePRO S1200 Black Thermostat with EIM

YTHX1200B8

✓

✓

✓

Wireless indoor temperature, humidity, & motion sensor. Up to 20 per thermostat.

C7189R3010

 

✓

N/A

N/A

N/A

*0 to 120 °F

(-17.8° to 48.9°C)

5% to 90%

Non-Condensing

-20 to 120 °F

(-28.9 to 48.9 °C)

2.4" W x 2.4" H x 0.77" D (61 mm x 61 mm x 19.6 mm)

Equipment Interface Module (EIM) for Indoor Unit

EIM4010

✓

N/A

N/A

N/A

-40 to 165 °F

(-40 to 73.9 °C)

5% to 95%

Non-Condensing

-20 to 165 °F

(-28.9 to 73.9 °C)

5-23/64" W x 8-5/64" H x 1-19/32" D (136 mm W x 205 mm H x 41 mm D)

Equipment Interface Module (EIM) for Indoor Unit (Current Release).

THM04R3000**

✓

N/A

N/A

N/A

-40 to 165 °F (-40 to 73.9 °C)

5% to 95%

Non-Condensing

-20 to 165 °F

(-28.9 to 73.9 °C)

5-5-16" W x 7-11/16" H x 1-1/2" D (135 mm W x 195 mm H x 39 mm D)

Antenna used with EIM4010 when signal from thermostat to EIM is impeded (Future Release)

ANT4010

✓

N/A

N/A

N/A

-40 to 167 °F (-40 to 75 °C)

N/A

N/A

4-13/16" H x 3-43/50" wide (122 mm H x 98 mm W)
Cable 118" (3000 mm +/- 10%)

Equipment Remote Module (ERM) for Indoor Unit (Future Release)

ERM4010

✓

N/A

N/A

N/A

Compressor: -40 F to +155 F (-40 C to +68 C)

Boiler: 30 F to +130 F ( -1 C to +54 C)

0% to 99%

RH

-20 to 165 °F

(-28.9 to 73.9 °C)

6-7/8" W x 6-39/64" H x 1-31/64" D (175 mm W x 168 mm H x 38 mm D)

Wireless outdoor temperature & humidity sensor

C7089R3013

✓

N/A

N/A

N/A

-40 to 140 °F

(-40 to 60 °C)

5% to 95%

Non-Condensing

-40 to 140 °F

(-40 to 60 °C)

5" H x 3-1/2" W x 1-11/16" D (127 mm H x 89 mm W x 43 mm D)

White cover plate and J-Box Adapter (included with white thermostat)

THP2400WH

N/A

N/A

N/A

N/A

N/A

N/A

N/A

4-19/32" H x 6-1/16" W (117 mm H x 154 mm W)

Black cover plate and J-Box Adapter (included with black thermostat)

THP2400BL

N/A

N/A

N/A

N/A

Floor/Slab sensor for radiant floor heat (optional for all ElitePRO thermostat models)

AC112-01

—

N/A

N/A

N/A

N/A

N/A

N/A

10 ft leadwires

Discharge or return sensor. (optional for all ElitePRO models; supports low A-Coil shutoff temperature)

C7735A1000

—

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Wired outdoor temperature sensor (optional for all ElitePRO thermostat models)

C7089U1006

—

N/A

N/A

N/A

N/A

N/A

N/A

5 ft leadwires

Wired indoor temperature sensor (optional for all ElitePRO thermostat models)

C7189U1005

 —

N/A

N/A

N/A

N/A

N/A

N/A

N/A

* For optimal battery life, operating temperature range of 35 to 114 °F (1.7 to 45.6 °C) is recommended.

** ElitePRO Redlink models are compatible with the THM04R3000 EIM with Firmware 1.1.4 or later (higher). This will be the firmware on THM04R3000 EIM from factory with date code 2337 or higher.